Belur, Howrah - 711202, West Bengal Mon–Sat: 9:00 AM – 7:00 PM

Frequently Asked Questions About Rolling Shutters in Kolkata

Everything you need to know about purchasing, automating, maintaining, and pricing rolling shutters in Kolkata, Howrah, and Eastern India.

Pricing & Purchasing

Prices are calculated based on the total surface area (Width in feet × Height in feet = Square Feet), the steel gauge thickness (18, 20, or 22 SWG), the material choice (GI, Galvalume, Aluminium, Polycarbonate), and the operation type (manual spring, mechanical gear, or electric motor).

Because standard raw material coil slitting, spring counterbalance tooling, and guide rail setup require a baseline manufacturing effort, the standard minimum billable area in Kolkata is 25 square feet per shutter unit.

Yes! Ideal Shutters offers complimentary on-site measurement, site suitability surveys, and engineering consultation across Kolkata, Howrah, Liluah, Belur, Salt Lake, and New Town.

Motors, Automation & Power Cuts

All motorized systems from Ideal Shutters are equipped with a mechanical fail-safe release and a continuous-loop hand chain. You can easily pull the chain from the floor to open or close the shutter without electricity.

Yes. Our Howrah service team regularly retrofits side-mounted or central tubular electric motors onto existing manual shutters, upgrading your axle drum and providing wireless remote controls.

Yes, our automation controllers utilize high-security rolling-code encryption technology that alters the radio frequency transmission key with every press, preventing code interception or unauthorized duplication.

Weather & Rust Resistance

We exclusively use certified hot-dip galvanized steel coils (120 to 275 GSM zinc) from TATA Steel and Jindal Steel, as well as 55% Aluminium-Zinc Galvalume alloys. Our multi-stage anti-corrosion pre-treatment and architectural powder coatings prevent rust formation even in high-humidity coastal zones.

For high-salinity coastal areas, we strongly recommend Galvalume (AZ150 alloy) or 6063-T6 extruded aluminium shutters, which provide 4x higher corrosion resistance compared to standard painted steel.

Yes. Our wind-resistant shutters are engineered to IS 875 (Part 3) cyclone standards, incorporating heavy cast-iron wind-lock retention cleats and deep 100mm+ steel guide channels to resist wind pressures up to 180 km/h.

Commercial vs Industrial Selection

Commercial shutters are designed for light daily use (1-2 cycles/day) using 20 or 22 SWG steel. Industrial warehouse shutters feature heavy 16 or 18 SWG cold-rolled steel, deeper structural channels, continuous-duty side motors, and heavy bearing plummer blocks designed for intensive 24/7 logistics use.

For retail storefronts in shopping malls, we recommend transparent polycarbonate rolling shutters (for 92% optical glass clarity) or perforated airflow shutters (for 24/7 window shopping and HVAC ventilation).

Installation, Warranty & Maintenance

Standard commercial and industrial orders are manufactured at our Belur works within 3 to 5 working days. On-site installation and motor commissioning are completed within 4 to 8 hours by our trained installation specialists.

We offer a 1-year comprehensive on-site warranty covering manufacturing craftsmanship, curtain alignment, counterbalance springs, and electric motors, backed by our 24/7 service crew in Kolkata.

For high-traffic industrial shutters, we recommend quarterly lubrication of guide tracks and gear teeth. For commercial shopfronts, a semi-annual inspection of spring tension and guide clearance is sufficient.

Have a Specific Engineering Question Not Listed Here?

Our senior technical engineers in Belur, Howrah are happy to guide you on structural wind loads, motor capacity, and slat gauge selection.

Call Engineering Desk WhatsApp Question